The Merino Hack: How To Get Heat Pumps Approved By HOAs

No balcony, no roof access, or an HOA that bans outdoor condensers? Here is how condo owners and multi-family building owners can still add heat pumps.

Yes, you can get a heat pump without an outdoor unit. A room heat pump like the Merino Alpha puts the compressor, fans and coils inside one indoor unit, so nothing goes on a balcony, roof or exterior wall bracket. It plugs into a standard 120V outlet and installs in under an hour, which makes it a practical fit for condos, apartments and older multifamily buildings.

Why outdoor units are a problem in multifamily buildings

Most heat pumps, including ductless mini-splits, need an outdoor condenser. In a condo or apartment that can be hard or impossible:

  • HOAs or building rules may restrict equipment on balconies, facades or roofs.
  • Upper-floor units may have no outdoor space at all.
  • Running refrigerant lines through shared walls or down a facade needs building approval and a licensed HVAC crew.
  • Older buildings often lack spare electrical capacity for new 240V circuits in each unit.

What a room heat pump changes

The Merino Mono is a room heat pump with every component in a single indoor unit:

  • No outdoor unit. No condenser to approve.
  • 120V plug. It draws at most 900 watts from a standard outlet, so most Merino heat pumps do not need a new circuit or panel work.
  • One short visit. A small installer crew can complete the job in about an hour.
  • One room per unit. Each Merino Alpha heats and cools a room up to 350 square feet.
  • Slim profile. 7.8 inches deep, so it doesn't take over a small room.
  • Flat price. $3,800 per room, with hardware and installation included.

For condo owners

Check your HOA's rules on exterior equipment and wall penetrations. A room heat pump avoids the outdoor-unit question entirely, which is usually the main sticking point. Once you're ready, book a site visit to get complimentary renders of what the Merino heat pump will look like from the inside & the outside. You can present these to your HOA, and voila! HOA approval is one step closer with Merino.

For multi-family building owners

Electrifying an older apartment building unit by unit is often easier than a central retrofit. With room heat pumps:

  • Work happens one room at a time, so units can stay occupied by tenants.
  • Each install is a single visit of under an hour, which keeps tenant disruption low.
  • There are no new ducts, roof-mounted condensers, or building-wide electrical upgrades.
  • Cost is predictable: a flat price per room, multiplied by the rooms you need.

This makes room heat pumps a strong option for adding cooling to apartments without tearing up walls, or for replacing wall furnaces and electric resistance heaters.

FAQs

Can I install a heat pump in an apartment with no balcony? Yes. A room heat pump like the Merino Mono needs no outdoor unit.

What is the best heat pump for a multifamily retrofit in California? For older buildings without central HVAC, room heat pumps let owners electrify one room at a time with no outdoor condensers. The Merino Alpha installs in an hour per room on a standard 120V outlet.

‍
See more FAQs here.