How To Add Cooling To Old Bay Area Homes

Most old homes in San Francisco and the Bay Area have no AC and no ducts. Here's a quick guide to adding AC to your old home one room at a time.

If your home has no air conditioning and no ductwork, the simplest way to add both heating and cooling is a room heat pump. A room heat pump like the Merino Alpha heats and cools one room from a single indoor unit. It plugs into a standard 120V outlet, needs no outdoor unit, and installs in under an hour for a flat $3,800, installation included.

Why so many Bay Area homes have no AC

Victorians, Edwardians and pre-war bungalows were built for a mild coastal climate. Many still rely on a wall furnace, a gas floor heater or space heaters, and have no ducts to carry cooled air. For decades that was fine. Hotter late-summer heat waves and wildfire smoke days, when windows need to stay shut, have changed that.

Your options

Central ducted heat pump. This works well if your home already has usable ducts from a forced-air furnace. If it doesn't, adding ducts means opening ceilings, floors or walls, which is disruptive and expensive in plaster-walled older homes.

Ductless mini-split. A mini-split pairs indoor wall heads with an outdoor condenser, connected by refrigerant lines run through the wall. It is efficient, but it needs space for an outdoor unit, usually a new 240V circuit, and a licensed HVAC crew. In San Francisco, published single-zone quotes run about $8,000 to $13,000 per zone.

Window heat pump or portable AC. These are cheap and easy, but they block a window, and portable units are noisy and less efficient.

Room heat pump. A room heat pump keeps every component in one indoor unit mounted against an exterior wall. There is nothing to place outside and no refrigerant lines to run. All the benefits of a mini-split, at a fraction of the price.

Why a room heat pump suits older Bay Area homes

The Merino Mono was designed for exactly this kind of house:

  • No outdoor unit. Good for tight side yards, shared walls and homes where an outdoor condenser isn't allowed or practical.
  • Standard 120V outlet. It draws at most 900 watts, so most homes don't need a panel upgrade or a new circuit.
  • Under an hour to install. One installer, one visit, minimal disruption.
  • Sized for real rooms. One unit serves a room up to 350 square feet, such as a bedroom, office or living room.
  • Slim. At 7.8 inches deep, it has a minimal presence in your home.
  • One flat price. $3,800 per room, hardware and professional installation included.

The Bay Area's mild winters and moderate summers mean you rarely need a large system sized for extremes. Many households start with the room they use most, such as a bedroom or nursery, and add more rooms later.

Where to start

  1. List the rooms that get uncomfortable, and their rough size.
  2. Check that each room has an exterior wall and a nearby 120V outlet.
  3. Start with the room you use most, and add others as needed.

The Merino Alpha is available to book for installation in the Bay Area and LA today. You can schedule a home visit here today.

FAQs

Can I get AC in a San Francisco house without ducts? Yes. A room heat pump like the Merino Mono adds heating and cooling to one room without ducts or an outdoor unit.

Do heat pumps make sense for a California home with no AC? Yes. A heat pump both heats and cools, and in California's mild climate it can replace space heaters and add cooling in one compact appliance.

See more FAQs here.